Re: [MW:15213] ER 70S-G has A no ?

Dear Deni Add to Mr Shridhars comments. for G catagory you require to check actual weld chemistry and accordingly address in PQR with brand  of filler and that PQR will be for specific brand Regards Hegde P.B, --- On Mon, 3/9/12, c sridhar <sridhar305@yahoo.com> wrote: From: c sridhar <sridhar305@yahoo.com> Subject: Re: [MW:15206] ER 70S-G has A no ? To: "materials-welding@googlegroups.com" <materials-welding@googlegroups.com> Date: Monday, 3 September, 2012, 10:24 PM Mr. Deni Rustiri, To understand the fundamentals of consumable manufacturing, the suffix 'G' states that, it is 'General' that is the chemistry shall be fixed as asked and mutually agreed upon in between the end user and the manufacturer  i.e., the manufacturer is not bonded by the code requirements. Examples: Consumables like E 7018G, E 8018G, E10016G, ER 70 S-6G etc, do not differ much with normal type except for certain specific requirements. Hence, Sec II part C of ASME  do not specify the actual chemistry or other details as they do not come under the acceptable norms of the code. sridhar. , From: Deni Rustari <deni.rustari@gmail.com> To: materials-welding@googlegroups.com Sent: Monday, 3 September 2012 12:13 PM Subject: [MW:15192] ER 70S-G has A no ? Dear Experts, How to explain that ER-70S-G has A No, because A no for GTAW process is an essential variable, If we refer to ASME sec II C, SFA 5.18 tabel 1 CHEMICAL COMPOSITION REQUIREMENTS FOR SOLID ELECTRODES AND RODS, for ER70S-G is Not Specified.. Thanks for your attention Best Regards Deni Rustari     -- To post to this group, send email to materials-welding@googlegroups.com To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com For more options, visit this group's bolg at http://materials-welding.blogspot.com/ http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm   The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
 
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.