Please dont mix your queries into others mails.
It creates confusion as Sandeep Kumar must be awaiting other replies also!
Please write elaborately with complete job details for solution in a new mail..
Regards
Prem S Nautiyal
Dy.Manager,Welding,
Godrej,Mumbai.
On Mon, 11 May 2009 15:00:08 +0530 wrote
>I have Co based material which used as coat on other normal material how can I replace this layer .
>can I use the welding to do so please help me >>>>>>>>
>seraj
>
>
>
>From: PB HEGDE
>Sent: Monday, May 11, 2009 12:21 PM
>To: materials-welding@googlegroups.com
>Subject: [MW:2141] RE: 2140] SMAW consumable for the welding
>
>
>Hi!
>
>Welding of this type of material (Used in machine tool ) is very critical and require to be welded by Eutectic type electrode. With proper preheating and technique. (Generally it is of Ni base) . You can approach L& T eutectic or MAGNA (Austrelian Co) they have the range of electrodes or Tig wire
>
>Regards
>
>
>
>Hegde p.B.
>
>
>
>From: materials-welding@googlegroups.com [mailto:materials-welding@googlegroups.com] On Behalf Of sandy kumar
>Sent: Monday, May 11, 2009 2:35 PM
>To: materials-welding@googlegroups.com
>Subject: [MW:2140] SMAW consumable for the welding
>
>
>
>Hi friends
>
>Can anyone please tell me which SMAW consumable I can use to weld following material combination :-
>
>
>
>1st material:-
>
> C.
> Si.
> Mn.
> S.
> P.
>
> 0.50%
> 0.25%
> 0.70%
> 0.05%
> 0.05%
>
>
>2nd material :-C=0.355,Si=0.6645,Mn=1.7084,P=.0209,S=0.0326,Cr=0.2083,Ni=0.0333, Mo=0.0314,
>
>Cu=0.0226,Al=0.0182,Ti=0.0177,V=0.0935,Nb=0.0103
>
>Please suggest which I can use if it is not suitable.
>
>Best regards
>
>Sandeep Kumar
>
>
>
>
>
>
>
>
>
>>
>
PREM S NAUTIYAL
CELL : 9820313278
 |
No comments:
Post a Comment