preheat isnot enough to avoid because thickness is below 16mm??
THANKS & BEST REGARDS,
KG.PANDITHAN, BE, IWE, CSWIP 3.1,
ISO 9712 Level 2 in VT,
ASNT-Level II in PT,MT,RT & UT,
LA ISO 9001-2015, ISO 3834, EN 15085,
International Welding Engineer.
CONSULTANT-WELDING & QUALITY
Mobile no: +919940739349
On Sun, Jun 29, 2025 at 5:43 PM PARAI Reaction Channel <saravanshyla@gmail.com> wrote:
--Dear Sirs ,
We have a project with both shell and Reinforcement Pad materials SA516-70, 10 mm Thk ( P No.1 ) and only the Nozzle is SA335-P22, 4" Sch 120 ,
11.1 mm ( P No.5A ) Thk.
To avoid PWHT for this case as per ASME Sec VIII Div I UCS 56-4 Table,
can we do buttering with ERNiCr-3 on P No.5A bevel prep. and butt weld
with same filler for this dissimilar joint to avoid PWHT after making new
PQR with buttering ?
ASME AI says, PWHT required after making buttering on P No. 5A bevel
Prep.
Please confirm.
Regards,
Saravanan,
S.Korea
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/materials-welding/CALV1rkL3X%2BcHVgesLKoRcO%3DTCGJvgKLdyro116%2Bh_1D9KmF6ag%40mail.gmail.com.
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/materials-welding/CAJzm4ePq1gJT8vHy%3DFwW%2BXzStM5N8nQRbOh2UBpAtYnuoX_3bQ%40mail.gmail.com.
Comments