If it's P8, won't a PQR qualified on 6mm thick cover the welding of this dis-similar thickness (QW-202.4)considering welding deposit thickness of 10mm?
Regards,
Michael
On Sat, Jun 28, 2025 at 12:02 PM Pravin Kurade <pravinkurade@gmail.com> wrote:
In this case it's dissimilar thickness and considering its P8 you need 20 mm thk welding procedure which will cover both the range I assume impact test not required.Thanks with Regards....Pravinkumar Kurade
ASME Authorized Inspector (National Board-15396),Repair Inspector (NBIC) R-Endorsement,PED Inspector, DOSH Inspector,B.E. (Mech.), Lean Six Sigma Green Belt,C-SWIP-3.1 (Welding Inspector - UK)ASNT Level II - MT, PT, RT , VT, LTMob : +91 8484848029--On Sat, 28 Jun, 2025, 9:25 am israr ahmed, <ahmedisrar.nm@gmail.com> wrote:--
dear teamWhat should be the range of qualification if we are welding sight glass thickness 40mm with shell of 10mm?Israr Ahmed Noor Mohammed
+919930308261
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/materials-welding/CAEJoza%2Bw8YOMSuBzMnVCePwFuvbJDVm6AtKDh0AhGZtmpqTHmw%40mail.gmail.com.
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/materials-welding/CAM02rkfO--fp%2B7vbFR737qW17dVoTkmvQQbPd36THjHn5Ti2-w%40mail.gmail.com.
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/materials-welding/CAFxNsAGdA1RJd0hQ%3D%3DnxoWTx_6bbuSDjw%2Bg%2B2O98SgzhPWNkXQ%40mail.gmail.com.
Comments