Re: [MW:35698]

Mpi for surface and Sub surface Free from defects.
Painted surfaces we can't create magnatic fields, also need test surfaces Free from paint,oil, grease and other foreign materials. No yes for this test ......

On Thu, 26 Jun 2025, 7:19 pm kyrillos saad, <kyrillossaad123@gmail.com> wrote:

ASME section  v 

non standard MPI have a look

On Thu, Jun 26, 2025 at 5:09 PM sriram Srinivasan <mail2ram40@gmail.com> wrote:

Dear all 

  Can I do MPI above painting surface for cs  tank 

Regards, Sriram Srinivasan

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/materials-welding/CAJwhjYurQ9X7zfy%3DNKT1VmsLCO%3DfDmnZRpHUrGbXquyRLHdccA%40mail.gmail.com.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/materials-welding/CAEOSkyPQA4i6yhhN7gSu6oK9c11b7jUNOaRyNsf1nfihzYXLHg%40mail.gmail.com.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/materials-welding/CAEE6DzeX4%3Dgr%2BXxhOc9e6uOB8B--%3DRhd8ix7MX1WhMs%3Da5_UGw%40mail.gmail.com.