Re: [MW:34472] Required WPS for Martensite with CS

Pl. furnish below 

1. Carbon steel % in Martensitic Steel 

2. Share MTC in Martensitic Steel 

3.What is the thickness?

4. What are service conditions

5 Is this pressure part or non pressure part 

6 Code of construction 

Thanks 

Vishwas 

IWE

On Wed, Aug 9, 2023 at 9:04 AM Mostafa Kamel <mostafakamelbp@gmail.com> wrote:

Hi Guys

I have 12Cr13 (Equivalent to martensitic stainless steel)  with Q355B (equivalent to ASTM A572 Grade 50)

Has any one WPS covered welding of above two materials?

BR

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CADxVihNKCFpiJvHKJHmOjuEns4VtGXpQKn8Rf_aEO4Rxhq4qqw%40mail.gmail.com.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CADder3OPtrMvfbt6wys1f2ZLqy23m6kqdyOfQEwVS9uwBMLuMw%40mail.gmail.com.