ALUMINIUM 6082 -T6 - 32mm , 20 mm , 16 mm plates
32mm ,-32mm- Butt joint
20 mm-20 mm-Butt joint
16 mm - 16 mm -Butt joint
Above plates are jointed through butt joints .
Welding Process - GMAW
Gas - Argon
Filler wire - ER4043
Due to job part length , there is distortion at the vicinity of butt welds. So Cold straightening operation was carried out on Press. The weld/HAZ cracking is observed immediately the press load is commenced
Pl. suggest suitable action for Welding/cold straightening
Thanks
Vishwas - IWE
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/597ef31f-53c7-4c81-9924-cbbdd688c49an%40googlegroups.com.
No comments:
Post a Comment