Re: [MW:33863] Single pass fillet weld (6 mm leg length) using 1mm GMAW wire

Stainless steel is the name for a range of steels used primarily because of its 

corrosion resistance. It is made up of chromium, iron and (in some cases) nickel, molybdenum and other metals. For a metal alloy (a metal made by combining 

two or more metallic elements) to be considered stainless steel, it should consist 

of at least 10.5% of Chromium; this composition prevents the iron in stainless 

steel rusting and provides heat-resistant properties.

As this is to be deemed stainless steel, a huge number of metal alloys fall into 

this category. These have been split into five groups (or families) of stainless steel:

1)         Austenitic

2)         Ferritic
3)         Duplex
4)         Martensitic
5)         Precipitation hardening steels

Of the five families, austenitic stainless steel is the largest. This family comprises 

of two sub-groups, the 200 and 300 series – with the 300 series alone accounting 

for nearly 50% of the stainless steel market.

Sridhar.

---------------------------------------------------------------------------------------------

On Monday, 26 December, 2022 at 08:46:49 am IST, Ubaidah Salam <us06095@gmail.com> wrote:

Hi, 

Guys, can someone Tell me the different categories/types of stainless steels.

 It's an interview question...!

On Thu, 22 Dec 2022, 07:23 'Sridhar Cn' via Materials & Welding, <materials-welding@googlegroups.com> wrote:

There are code limitations in achieving fillet sizes. You can get even a

8 mm size fillet using 1.00 mm filler wire in a single pass or a 6 mm 

fillet using 0.80 mm size wire also.

Select your parameters to achieve the required fusion and penetration

without an undercut.

Sridhar.

-------------------------------------------------------------------------------------------

On Tuesday, 20 December, 2022 at 08:49:28 am IST, Ganesh R nair <ganeshrnair9@gmail.com> wrote:

Dear all,

Is there any code limitations to use 1mm mig wire to achieve 6mm fillet weld (leg length) in a single pass.

Thanks,

Ganesh R Nair

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAJ_8oJX7W1BVjNm%2Bh%2B%2BFJkD9K9Tky1Xtuop%2B2EhZmxHHCYriwQ%40mail.gmail.com.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/1313242092.2100972.1671679235531%40mail.yahoo.com.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAPV6pqTOMqONm3gY_TXtGqWuhyc%3D92tht_jozcy%2BHAcOtE%3DM_A%40mail.gmail.com.