[MW:33841] Re: PQR Qualification

All these are P1 materials then they should be qualified by default. 

On Monday, 28 November 2022 at 16:27:00 UTC+13 williamswilsonp wrote:

Dear Experts,

I have a doubt noted below for your advice.

If I used the Steel Designation SA 516 Grade 70  65  60 MTLTV for procedure qualification. I will be qualified for P1 G 1 / 2   To   P1 G 1 / 2
Single PQR / WPS satisfy my below welding requirements. 

(Toughness & PWHT considered)
1) SA 516 Gr.70 to SA 516 Gr.70
2) SA 106 Gr. B to SA 105
3) SA 106 Gr. B to SA 106 Gr. B

Thank You & Regards

Williams P Wilson

+968-94600828

QA/QC Engineer

Please consider the environment before printing this message

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/43ecebd3-7536-4560-aae0-f1a4ccd93e3fn%40googlegroups.com.