Re: [MW:30076] Simulation heat treatment as per code

You could be clearer about this

El mié., 18 sept. 2019 a las 8:29, Muhammed Ibrahim PK (<ibratech@gmail.com>) escribió:

Gents, 

Is simulation heat treatment required for material as per latest ASME sec viii?.

Reg, 

Ibrahim

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CALOPgmP365NQ2BxRRL8g95bcG29jUbC3ujmPqp7wwk%2BOa9YbSQ%40mail.gmail.com.

--

Ing. José Juan Jiménez Alejandro

Independent Consultant in Parts

and Pressure Equipment

SSI-TPI

Móvil +52 1 812 352 4606

Skype: jjjimeneza

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAO5Zur%2Bt%3DtZ31jjhf1h5jOv3PoyU8ODQxdH4BtbEoSHSX1MzFg%40mail.gmail.com.