[MW:30087] Re: UT requirement acceptance criteria API5LD

API 5LD is not very clear on this, std needs a revision to address this along with other issues (there are many problems with this std). However, I would recommend you to perform UT for disbondment inspection as per the criteria laid in Clause 11.1 of API 5LD     

On Thursday, August 15, 2019 at 10:13:56 PM UTC+5:30, neilash kumar wrote:

Gents 

Is there UT mandatory as per API5LD?  For claded product . Weld overlay on pipes.

Regards

Neilashkumar 

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/8b14d6f1-3bae-4e71-8385-302814d80292%40googlegroups.com.