Wednesday, September 18, 2019

[MW:30071] AWS D1.1

Dear All,

Is there any restriction for material welding in position as per above mentioned code.
for one of our client is given comments for position for particular material.
For material S355JR#S355JR welding - Limited to F,H&V position. OH not allowed.

Please any one know in which clause they have mention we can't use  OH is not allowed.
Thanks and Regards
Kiran

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/f8d4b73e-ee57-4d29-afa1-d609f1162508%40googlegroups.com.

No comments:

Re: [MW:35737] Bend Test and Tensile Test failed for ET45 Micro Welded Coupon

Hi As its %elongation is very low  Better try buttering on jt surrace with ductile consumable like pure Ni i. E Ni1 And later weld jt with c...