Dear experts,
I have query regarding welder qualification for sockolet welds. A 24" header pipe to be welded with 3/4" CL6000 sockolet. (Spec. A105N MSS SP-97). Based on MSS SP-97 thickness calculation of 3/4" CL6000 is 12.7mm. Full GTAW process to be used for this joint and my welder qualified for 11.08 maximum thickness only. Can I use this welder for this joint. As everybody knows this is a groove fillet weld and how to calculate the groove thickness for this joint. Any code reference is for that. Please advice me.
Regards,
Linoy
--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.
Subscribe to:
Post Comments (Atom)
-
Q: What are equivalents for standard Q 235 B (and Q 235 A) for U-channels? ...
-
Definition of buttering from ASME Section IX, QW/QB-492 Definitions: Buttering: the addition of material, by welding, on one or bot...
-
Section I. PRINT READING 3-1. GENERAL a. Drawings . Drawing or sketching is a universal language used to convey all necessary information to...
No comments:
Post a Comment