Re: [MW:24782] Nozzle Marking On Cap

Check ASME Section VIII Div. 1, UG-79, UG-80 and UG-81 for Cap 2:1
Regatds!.

El 11/05/2016 07:56, "Saravanan Sornam" <saravanshyla@gmail.com> escribió:

Dear Mr.George ,

Let me explain my query more clearly.

One of our Pressure Vessel to be constructed with SA 106 Gr.B Pipe of 10" and SA-234 WPB Seamless Cap of same 10", as per ASME Sec VIII Div-1, 2015 Ed.

So, to perform 1" Nozzle opening on the Cap , referring to the below sketch,

can I consider the Cap as a 2:1 Ellip. Head, using 0.9 Crown radius to use in the formula, inorder to find the Arc Length.

Please see the attached file, for the calculation which I made to get Arc Length .

Hope you will understand .

Sorry for the inconveniences caused.

Regards,

Saravanan

On Wed, May 11, 2016 at 8:12 PM, George Dilintas <dilintas@gmail.com> wrote:

I would like to help you but I dont understand your question

2016-05-11 4:00 GMT+03:00 Saravanan Sornam <saravanshyla@gmail.com>:

Dear Design Experts,

With reference to the attached sheet for 1" Nozzle Marking on a 10" Sch 20 SA-234 WPB Seamless Cap for a pressure Vessel construction as per ASME Sec VIII , Div-1, 2015 Ed ,

My query is, can we consider the Seamless CAP ( ASME B16.9 ) as same as 2:1 Ellipsoidal Head for the Nozzle marking calculation, provided in the attachment for opening , inorder to find Arc length.

Also, I need reference to consider Cap as 2:1 Ellip. Head in ASME Code.

Regards ,

Saravanan

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CALV1rkJTaHVkuZcycCuxu7VjvFRApdeEWmp_cm56-5c1w6%2BTeQ%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.

--

Dr. Georgios Dilintas,

Dipl. Ing. In Aeronautic and Space Engineering

Ph.D in Mechanics of Solids - Computational Mechanics

A.I.S, A.N.I, IRCA Lead Auditor

Welding, Stress Analysis, Corrosion, QA/QC, Failure Analysis, Risk Analysis

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAPOi40ArzuAf0rdRTx15wUUJk013A5_ApxJ7X2Ok_kuH5tKRdQ%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.

To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CALV1rkK_JSf9YvetU_FMQoT3CWC6ESvWuZWr8-%2BRoDq-ayWcOw%40mail.gmail.com.

For more options, visit https://groups.google.com/d/optout.

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAO5ZurLjVGNfjwU%2BvddgBjJ4sVTyC7WjhdVa5qvAV0K8C46CTQ%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.