Monday, October 22, 2012

[MW:15746]

Mr. Kishore,

Please suggest with proper standards calculation for fillet leg length and throat thickness calculation


With reference to above the calculations as follows:

1. Fillet leg length    ' L' - 0.75 times of Base Metal Thickness  (for load bearing structures)

2. Fillet leg length    ' L' - 0.38 times of Base Metal Thickness  (for non load bearing structures)

3. Throat thickness  ' t'  - 0.71 times Leg length.' L'

Hope it  will be of use to U.

Sridhar.
----------------------------------------------------------------------------------------------------------------------------------------------------------------

No comments:

[MW:35692]

Dear all    Can I do MPI above painting surface for cs  tank  Regards, Sriram Srinivasan -- https://materials-welding.blog...