[MW:1383] Re: WPS qualification

Thanks, if impact is required then which filler metal to be used for qualifying WPS with different group and with same P no.

 

Regards,

 

S T Puranik

On Wed, Dec 3, 2008 at 12:01 PM, Muhammed Ibrahim <ibratech@gmail.com> wrote:

Group number is to be considered when impact is required.

 

 

2008/12/3 SHRIRAM PURANIK <stpuranik@gmail.com>

Can any body clarify for SA 240 TP 310S (P8 Gr. 2) + SA 240 TP321 (P8 Gr.1)  WPS to be separately qualified if I have separate qualified WPS and what filler wire to be used.

 

Regards,

 

S T Puranik

--
Shriram Puranik

--
Thanks & Regards
Muhammed Ibrahim PK

--~--~---------~--~----~------------~-------~--~----~
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
-~----------~----~----~----~------~----~------~--~---