The pipe needs a “shoe” to prevent corrosion down the road…good luck!
Mark Weaver
UOP Callidus
918.523.2273 O
918.549.8354 C
From: materials-welding@googlegroups.com [mailto:materials-welding@googlegroups.com] On Behalf Of sumod s
Sent: Wednesday, April 10, 2013 4:55 AM
To: materials-welding@googlegroups.com
Subject: [MW:17330] Pipe joint resting on the beam
sir,
Please explain the basic reason for not permitting the practice as seen in attached photo.
sumod
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.
No comments:
Post a Comment