Re: [MW:16763] Pull out Test Required in Tube to Tubesheet Welding

Dear sir
tube to tube sheet pullout ( mockup test) is for to check tube
expansion in tube sheet strength and leak tightness and pressure
withsatnading wether it is u- tube or straight tube construction.

regards

gsr


On Wed, Feb 13, 2013 at 12:18 PM, Mohit Aggarwal
<aggarwalmohit05@gmail.com> wrote:
> Respected Experts,
>
> I want to know why we done pullout test in Tube to tube sheet welding and
> not done in U-tube construction.
>
> As per client specification Pullout is required in one of our job but tube
> construction is U-tube.
>
> How strength can be established if pullout is required. Job Code applicable
> is ASME Section III NB class1 components & ASME Section III NC.
>
>
> Thanks
>
> Regards
> Mohit Aggarwal
>
> --
> To post to this group, send email to materials-welding@googlegroups.com
> To unsubscribe from this group, send email to
> materials-welding+unsubscribe@googlegroups.com
> For more options, visit this group's bolg at
> http://materials-welding.blogspot.com/
> http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
>
> The views expressed/exchnaged in this group are members personel views and
> meant for educational purposes only, Users must take their own decisions
> w.r.t. applicable code/standard/contract documents.
> ---
> You received this message because you are subscribed to the Google Groups
> "Materials & Welding" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to materials-welding+unsubscribe@googlegroups.com.
> For more options, visit https://groups.google.com/groups/opt_out.
>
>

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm

The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.