Monday, August 8, 2022

Re: [MW:33370] USER's definition in API codes

Dear Krishna, 

In your case you must use epoxy grouts in all cases, 
And the Client/User/Owner can say whether the use epoxy grouts for all machinery can have any other alternative method or not. 
EPC dont have the right to override this. You may also raise a TQ to get a waiver or any alternative ways for this from client.

regards



On Monday, 8 August 2022 at 03:19:14 pm SGT, 'JOEL REMOROZA' via Materials & Welding <materials-welding@googlegroups.com> wrote:



Inline image


On Monday, August 8, 2022 at 10:03:21 AM GMT+3, Raghuram Bathula <raghurambathula@gmail.com> wrote:


see definition 2.20

On Mon, 8 Aug 2022 at 12:26, krishna kamal nayan Pandey <kkmech1987@gmail.com> wrote:
Dear Experts,
We have some ongoing arguments at site with reference to the word "USER" in API 686.

"Unless otherwise specified by the User, all machinery shall be grouted using epoxy grouts."

With the above statement in API 686 , User is defined for EPC contractor or Client / Owner.

Please advise.

Best Regards,

 

Krishna Kamal Nayan  



--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/materials-welding/CADxVub%3DeYeoWHc_OFitnbWBqc8N8ikBJOq5iFq5A_uR2y2VkKA%40mail.gmail.com
.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/materials-welding/132527853.1157107.1659942536354%40mail.yahoo.com
.

No comments:

Re: [MW:34832] Inquiry about Single Bevel with Back Grinding

Dear Uday, As per your question that one is called with backing only,Simple both side you are welding it is backing with strip or without st...