Saturday, September 5, 2020

Re: [MW:31393] IBR PTC coupon Testing

If your query confined to production weld then only DPT can be performed as additional test not mendatory but good for these typ of joint.
Atul jha

On Sat, Sep 5, 2020, 16:32 Devalkumar Desai <dd101189@gmail.com> wrote:
Hi Ankit,

You have to design-perform mock up as per IBR.
IBR inspector will also witness the TTS Mock up welding  and lab test.

On Fri, 4 Sep 2020, 5:02 pm Patel Ankit, <aapatel271@gmail.com> wrote:
Dear Expect,

Currently I have one IBR job in my project.
Equipment is HP Heater.
In this job  I have do tube to Tubsheet Strength welding.
Pl suggest any additional test for This TTJ joint.

Sir can you tell me about this?


Regards,
Ankit Patel

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CALR-PuxNibPVGrdhGhoqZYaE%3DU3UUa5BBGB8JKEgNKui_grNQA%40mail.gmail.com.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAM94n3qaArdKgCn4gLzVcg%3D38Km9qvkZd5nnahRwaDaVD851og%40mail.gmail.com.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAC1tTU%2B0pcMDR%3DWt_xcN-sPf4roBQeSGP2kVVeYEmA24o%3DXJew%40mail.gmail.com.

No comments:

Re: [MW:35289] Welding consumable for S355J2WP material

S355 J2 WP  is a weathering structural steel  It has better atmospheric corrosion resistance. Use E 8018 - W1/W2  Electrodes This is regular...