Sunday, September 6, 2020

[MW:31394] Regarding welding qualification ASME Section IX v/s EN 15614-1.

Dear Sir,

I have some queries  regarding welding qualification of ASME &EN Code. 

Following queries as mentioned below:
1) can we use qualified  WPQR  as per ASME IXwith additional test as required in BS EN ISO 15614-1-2017+A12019 for design code PED.

2) How to decide the level 1 or 2 for welding as per BS EN ISO 15614-1-2017+A12019

3) Is it essential to mention both the test methods that is ASME & EN in lab test report?

4) welder qualification test carried out as per EN ISO 9606 -2019  under TPI. should required to qualify the same by notified body or can we use the same as per PED code 2014/68/EU annex I para 3.1.2.

We have already qualified WPS & PQR as per ASME Sec.IX with supplementary testing of Micro, Hardness, Impact & LPT. Can we use the same for PED.



Awaiting for your reply.

Thanks & Regards
Vivek





--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CANCwoYnqFy0zXg9LDy1BxvgJ52Kc%2Bd2ke9Oj5THNQcjraaxvPQ%40mail.gmail.com.

No comments:

Re: [MW:35289] Welding consumable for S355J2WP material

S355 J2 WP  is a weathering structural steel  It has better atmospheric corrosion resistance. Use E 8018 - W1/W2  Electrodes This is regular...