Re: [MW:31391] IBR PTC coupon Testing

Hi Ankit,

You have to design-perform mock up as per IBR.

IBR inspector will also witness the TTS Mock up welding  and lab test.

On Fri, 4 Sep 2020, 5:02 pm Patel Ankit, <aapatel271@gmail.com> wrote:

Dear Expect,

Currently I have one IBR job in my project.

Equipment is HP Heater.

In this job  I have do tube to Tubsheet Strength welding.

Pl suggest any additional test for This TTJ joint.

Sir can you tell me about this?

Regards,

Ankit Patel

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CALR-PuxNibPVGrdhGhoqZYaE%3DU3UUa5BBGB8JKEgNKui_grNQA%40mail.gmail.com.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAM94n3qaArdKgCn4gLzVcg%3D38Km9qvkZd5nnahRwaDaVD851og%40mail.gmail.com.