Re: [MW:30413] Welding of SA 537 CL. 2

Please do not refer replies by name. This is a group created with common interest. Question may be raised by anyone but the amswer is addressed to all member and is beneficial to all members.

When ever a reply is given either give references of code or say its your opinion based on your personal experience.

FOUNDER MEMBER

Thanks & Rgds.
Prakash Gotimukul
Authorised Inspection Supervisor
AIA LLC TX USA
MOB +97155 7114671
           +919730039755

On Mon, Jan 20, 2020, 12:03 Revdiwala Darshan <darshanmrevdiwala@gmail.com> wrote:

Dear Mr. Prakash,

Thanks for your reply, the details are mentioned below for your reference.

Impact required at MDMT -45

Service is Wet sour

There are different thicknesses from 20mm to 70mm.

PWHT Expected at 635 +/- 10 Deg.

PWHT Soaking Time max. 10 hours and Min. 1 hour.

Thanks & Regards,

Darshan

On Sun, 19 Jan 2020, 7:37 am 'Prakash Hegde' via Materials & Welding, <materials-welding@googlegroups.com> wrote:

Hi!

However what are the requirement?

Like

Impact test temp.Thk of weld n plate.Process being used . PWHT tem n time  consumables used

On this basis you can decide parameters and  precautions to be followed

Regards

Hegde

Sent from Yahoo Mail on Android

On Sun, 19 Jan 2020 at 7:29, Revdiwala Darshan

<darshanmrevdiwala@gmail.com> wrote:

Dear Experts,

Can anyone suggest welding consumables for welding of SA 537 CL 2 ?

And precautions during welding.

Thanks,

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CABDq6ghMxsVcLvE9XAqhUQutToi5dP8_-x30A6RdUcjKdpzSfg%40mail.gmail.com.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/1239338402.2908207.1579405972304%40mail.yahoo.com.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CABDq6gi8_r5C%2BDprVGZztSeScs_VN_N8fuZB66sZgoqXx3HLcw%40mail.gmail.com.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAOUP4qKWoVeY_d%2B1ddmTdrCK4nHVm8nq%3DzEc4MhcFEYfoPHeig%40mail.gmail.com.