YES- WPS is qualified by testing. F-A nos are same for P8-P8 SMAW process.
On Friday, January 17, 2020, 11:25:41 AM EST, Nasir Olajide . <nasir.olajide@gmail.com> wrote:
The answer is YES, the base metal used in the PQR supports that in the WPS.
SA240 grade 304L is P-No 8.
On Thu., Jan. 16, 2020, 8:17 p.m. Muhammed Ibrahim PK, <ibratech@gmail.com> wrote:
Gents,--Please help to find the answer for below. Choices are given below. What would be the answer?A repair organization has a WPS which states it is qualified for P-8 to
P-8 material welded with E308, E308L, E309, E316, electrodes (SMAW
process). The PQR, supporting this WPS, states the weld test coupons were
SA-240 Type 304L material, welded with E308 electrodes. Is the WPS properly
qualified for the base material listed?A. Yes
B. No
C. Not enough information given
D. Yes, if properly heat treatedThanks & Regards
Muhammed Ibrahim PK
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CALOPgmNviEu9VaoJQjzFC3gz5ci1_AaJty1vnCukLYVpsTimPg%40mail.gmail.com.
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAF6CH93K1y7C5G375Mox2HXxu7LQT8hqhNaMXVUYWAkzpHLgeg%40mail.gmail.com.
Comments