What is the code of contruction. If it is AWS D1.1, yes required. But otherwise no.--On Sun, 7 Oct 2018 3:34 pm SUNILKAUSHIK, <sunilkaushik08@gmail.com> wrote:Dear sir,--
I am working in fabrication company of piping.My company divided the the welders in two different area-(1) tack welders & (2) welders.Tack welders are working at fitup section & welders are working in welding area.Now my question is that-is it required to qualify the tack welders?If yes then why? If yes than how i will proceed & how to make the prolongation of tack welders?
On Thursday, 15 December 2011 20:22:28 UTC+5:30, samshuddin k wrote:Dear Sir
Thanks for your guidance.
Still I am not clear with the concept
ASME Sec IX says all welding shall be done by a qualified welder, So
for tacking groove joint,
welder need to be qualified for groove joint.....?
Or if he qualified for fillet joint, he can allowed for tacking groove
joint (Tack either incorporated into the final weld or removed).....?
please reply
Samshuddin.K
Asst Engineer-QSA
N-KOMOn 12/13/11, Morin, Darcy (Bantrel Management Services)
<Mor...@bantrelmanagementservices.com> wrote:
> ASME IX recognizes "Welders and Welding Operators". There is no provision
> for "Tack Welders" in ASME IX. However, ASME B31.3 328.5.1(c) mentions
> "Tack Welders", and here is the subsequent Interpretation of this clause:
>
>
>
> Interpretation 22-35
>
> Subject: ASME B31.3-2008, Para. 328.5.1(c), Tack Welding Welder Performance
> Qualifications
> Date Issued: October 5, 2009
> File: 09-1003
> Question (1): Does ASME B31.3, para. 328.5.1(c) require that tack welds,
> whether they are to
> be incorporated into the final weld or be removed, be made by a qualified
> welder?
> Reply (1): Yes.
> Question (2): Does ASME B31.3, para. 328.5.1(c) require that tack welds be
> made to a qualified
> WPS for that joint?
> Reply (2): Yes; see para. 328.5.1(a).
> Question (3): Does ASME B31.3, para. 328.5.1(c) allow tack welds on a groove
> weld joint to be
> made by a welder qualified on a fillet weld test?
> Reply (3): No. See ASME BPV Code Section IX, para. 303.2.
>
>
> Regards,
>
> Darcy Morin
>
> Bantrel Management Services
> mor...@bantrel.com
> o - 780 979 6225
> c - 780 782 5692
>
> -----Original Message-----
> From: material...@googlegroups.com
> [mailto:material...@googlegroups.com] On Behalf Of samshuddin k
> Sent: December 13, 2011 9:49 AM
> To: materials-welding
> Subject: [MW:13203] Tack welder qualification
>
> Dear Experts
> There is any clause in ASME Sec. IX for tack welder qualification.
> Which Code explains tack welder qualification for piping regards
> Samshuddin.K
>
> --
> To post to this group, send email to material...@googlegroups.com
> To unsubscribe from this group, send email to
> materials-weld...@googlegroups.com
> For more options, visit this group's bolg at
> http://materials-welding.blogspot.com/
> The views expressed/exchnaged in this group are members personel views and
> meant for educational purposes only, Users must take their own decisions
> w.r.t. applicable code/standard/contract documents.
>
> This e-mail and any attachments may contain confidential and
> privileged information. If you are not the intended recipient,
> please notify the sender immediately by return e-mail, delete
> this e-mail and destroy any copies.
>
> Any dissemination or use of this information by a person other
> than the intended recipient is unauthorized and may be illegal.
>
> --
> To post to this group, send email to material...@googlegroups.com
> To unsubscribe from this group, send email to
> materials-weld...@googlegroups.com
> For more options, visit this group's bolg at
> http://materials-welding.blogspot.com/
> The views expressed/exchnaged in this group are members personel views and
> meant for educational purposes only, Users must take their own decisions
> w.r.t. applicable code/standard/contract documents.
>
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.
No comments:
Post a Comment