Re: [MW:23105] Doglegs Tolerance

Presume , you are referring to the Drilling equipments (Like Rams ), if so  in general , It shall come from the OEM spec /Drawing.

Thanks & regards,

K.Babu

On Wed, Jun 17, 2015 at 9:04 PM, krishna kamal nayan Pandey <kkmech1987@gmail.com> wrote:

Can any body gives permissible tolerance for Dog leg. Whether any standard is covering this tolerance.

 

Best Regards,

 

Krishana Kamal Nayan

QA/QC  Engineer

Weatherford Oil Tool Middle East Ltd. |

Mobile:+964 780 925 0270

Krishana.Nayan@ME.Weatherford.com  │ www.weatherford.com

 

--
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at http://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAN%2Bgo9CfWqhkWxW80UBPPdRTi4ex%3D5VWFh_yCtkopBzMrA_q2A%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.

--
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at http://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAEAMYiX9JqAaTYy1y6b1pMBtkCgQteMzC3F-riw4oH-gA%3DtzEw%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.