Monday, January 19, 2015

[MW:22736] OVERLAY WELDING QUALIFICATION

Dear Sir,

 

Please let me know what are the test required for overlay welding of Stellite-6 on Carbon Steel Casting conforming to ASTM-A 216 Gr. WCB of Valve like PT and Hardness as per ASME Section IX

Please let me know whether FUSION Test is required or not?

The thickness of WCB Plate is 26mm and Overlaying welding is single layer and minium requirement of overlaying is 1.6mm after machining of job.
  
REGARDS

 

 

By -

No comments:

Post a Comment

Subscribe to: Post Comments (Atom)

Re: [MW:35686] HDPE WPS

Refer ASME SEC IX  There is separate chapter for Plastic welding . Based on that you have to prepare  Sent from my iPhone On 21 Jun 2025, at...

  • Materails FAQs
    Q: What are equivalents for standard Q 235 B (and Q 235 A) for U-channels? ...
  • RE: [MW:5585] Buttering of weld joints
    Definition of buttering from ASME Section IX, QW/QB-492 Definitions:   Buttering:  the addition of material, by welding, on one or bot...
  • WELD AND WELDING SYMBOLS
    Section I. PRINT READING 3-1. GENERAL a. Drawings . Drawing or sketching is a universal language used to convey all necessary information to...