[MW:10943] RE: 10931] UT & PAUT is allowed on 7.2 mm thk PIPE

You can refer to DNV OS F101, it explains the restrictions for UT, it definitly has to be referred first to your client's specification, but I believe AUT is the test required.

 

Regards.

---

De: materials-welding@googlegroups.com [mailto:materials-welding@googlegroups.com] En nombre de PUB:nam raz
Enviado el: Martes, 03 de Mayo de 2011 06:58 a.m.
Para: materials-welding@googlegroups.com
Asunto: [MW:10931] UT & PAUT is allowed on 7.2 mm thk PIPE

Dear all,

 

Please clarify my below mentioned queries,

 

Can we use  Manual UT or PAUT (PHASE ARRAY ULTRASONIC TESTING) for finding defects in 18" API 5L X65 ,7.2mm thickness pipe.The pipe is longitudnal welded.We have to scan the only on the longitudnal seam.

 

Please confirm,weather the code permits to do UT on this thickness,if any code says please send me the details.

 

Also please clarify,if any code restricts the UT to any thickness limit(MIN/MAX)

 

If anyboby need more details,please ask me...

 

 

Regards,

 

Namzi..

Doha,Qatar

 

 

 

 

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.