Tuesday, July 27, 2010

Re: [MW:6144] Welding of 140 KSI material

Dear Romio,
 
What's Material Specification & Which Type of Products this Material is used FOR....?
 

Thanks & Regards

Mohamed.Hegazy

QA QC Welding Engineer

AWS Certified Welding Engineer CWEng.

TWI CSWIP Welding Inspection 3.1.

VSA Consortium ( VEOLIA, SAIPEM & Aljaber )

QATAR SHELL PEARL GTL Project
Ras Laffan ,Qatar

 

QATAR :  +9743694501 

EGY:       +20142345614

Email       : MH_W_Inspect@Yahoo.COM 


--- On Mon, 7/19/10, romio dabre <romiomdabre@gmail.com> wrote:


From: romio dabre <romiomdabre@gmail.com>
Subject: [MW:0] Welding of 140 KSI material
To: materials-welding@googlegroups.com
Date: Monday, July 19, 2010, 8:10 AM

Dear All
 
We need to weld following pipe material
 UTS 845/855 Mpa,
 T.S. - 990/1000Mpa
 Chemical Comp. - 0.35C, 0.65Mn, 0.20Si, 0.95Cr., 0.18Mo
 
Can anybody advise suitable consumable for this application
 
Thanks
 
 
 
 
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

No comments:

Re: [MW:34832] Inquiry about Single Bevel with Back Grinding

Dear Uday, As per your question that one is called with backing only,Simple both side you are welding it is backing with strip or without st...