[MW:1879] Re: welding distortion

Try Brazing. Section IX does over brazing.

Thanks

Johnson Madukayil

On Sat, Apr 4, 2009 at 2:48 AM, Tansu Ozcelebi (KREA) <tansuozcelebi@gmail.com> wrote:

0,01 mm is not possible in welding method.
:( There is heat in process.

Tansu Ozcelebi
Manager
KREA Makina Muh. Ltd.Sti.
tansu@kreamakina.com
Tel        : +90.232.478 59 78  Ext : 14
Mobile : +90.533.489 55 22
Fax      : +90.232.478 60 32
Address : 1605 sk No : 30 Doganlar Mah.
Bornova-IZMIR-TURKIYE

(*) KREA has been certified to ISO EN 3834-2:2005
(*) Our web page is reconstructed, please check www.kreamakina.com


On 30 Mart, 08:27, sandy kumar <sandy001...@gmail.com> wrote:
> Hi all I have one problem, if anyone have a solution these plz. give. I want
> to weld a tobe of wall thk. 5 mm. I want to acheive a weld of 20 mm od pipe
> on its wall with a controlled distortion of 0.01 mm. Can anyone please tell
> m which welding process I adope to acheive this. Please tell.

--~--~---------~--~----~------------~-------~--~----~
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
-~----------~----~----~----~------~----~------~--~---