[MW:792] Re: Arc Generation

--~--~---------~--~----~------------~-------~--~----~
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
-~----------~----~----~----~------~----~------~--~---

Subscribe to: Post Comments (Atom)

Re: [MW:34913] Filler wire

E71T-1C  is Charpy Impact tested at -20degC E71T-1CJ is Charpy impact tested at -40degC. AWS Classification for FCAW is only a supplementary...

• Materails FAQs

  Q: What are equivalents for standard Q 235 B (and Q 235 A) for U-channels? ...
• RE: [MW:5585] Buttering of weld joints

  Definition of buttering from ASME Section IX, QW/QB-492 Definitions:   Buttering:  the addition of material, by welding, on one or bot...
• 

  WELD AND WELDING SYMBOLS

  Section I. PRINT READING 3-1. GENERAL a. Drawings . Drawing or sketching is a universal language used to convey all necessary information to...

Search This Blog

Dear Friend , Arc Is generated due to ionization of gas --- On Wed, 21/5/08, Mahuri Snehkumar (TIPO - QA/QC) <S..Mahuri@panipat.ticb.com> wrote: From: Mahuri Snehkumar (TIPO - QA/QC) <S.Mahuri@panipat.ticb.com> Subject: [MW:791] Arc Generation To: materials-welding@googlegroups.com Date: Wednesday, 21 May, 2008, 3:07 PM Dear all,   Can any one tell me in welding how arc is generated.   Regards,   Snehkumar L. Mahuri QA/QC EPCC 2A, PANIPAT 9215989508