Tuesday, May 13, 2008

[MW:771] TRIM 13 CR

Dear friends,

 

As per our Valve specification, the TRIM shall be 13 CR.

 

The Vendor is offering A105 + 13% CR. The Vendor justify that 13 CR is an alloy steel with and combination of CS & Chromium 13%. That means A105 + 13% CR is 13 CR.

 

Is it right…..

 

Could you please explain to me the composition of 13 CR, 18 CR etc? Where can I find these details?

 

Thank you

 

Regards,

 

Sabir


--~--~---------~--~----~------------~-------~--~----~
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
-~----------~----~----~----~------~----~------~--~---

No comments:

[MW:34820] RE: 34813] Clarification in Rate of heating and cooling.

Hello,   Please see the response below.   Regards.   P. Goswami, P. Eng, IWE.   From: materials-welding@googlegroups.com <materials-weld...