[MW:768] Re: A234 WPB & WPBW

Dear Mr. Rushabh,

 

I understand that in SA 234, for WPB there are two method of construction.

Seamless - WPB

Welded - WPBW

 

Is it possible to get Fittings above 16'' as Seamless Construction?

 

I have to procure a 36'' EQUAL TEE and 36'' x 24'' RED TEE. All the vendors are offering Welded Construction, but the Client prefers Seamless. Am I right at the statement that, all fittings above 16'' are Welded Construction only.

 

AM I RIGHT…..?

 

Kindly advice me…

 

Thank you,

 

Regards,

 

 

Sabir

On Fri, May 9, 2008 at 10:53 AM, Nick <rushabh.kapadia@gmail.com> wrote:

Dear Sabir,
Please refer page No.385 of Sec II Part - A (A234).

WPBW is mandatory Marking on the fittings. So the requirements are met
as per A234.

If there is still problem please reply to this.

Rushabh C. Kapadia

On May 8, 1:27 pm, "Zameer Mohammed" <dreamthinkw...@gmail.com> wrote:
> Dear Friends,
>
> As per our specification,
>
> 36'' EQ TEE & 36'' x 24'' RED TEE is C.S. A234 GR WPB BW.
>
> The vendor is offering - C.S. A234 *GR. WPBW*, BW
>
> How can I convince my client that *WPBW *will confirm to the Chemical
> Requirement, Tensile Requirement, for WPB.
>
> Thank you,
>
> Regards,
>
> Sabir

--~--~---------~--~----~------------~-------~--~----~
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
-~----------~----~----~----~------~----~------~--~---