Materials & Welding

HELLO SENTHILCUMAR,   Before proceeding with the requalification of the welder under ASME Section IX, it should be verified if this welder qualified under API 1104 covered the essential and non-essential variables requested by ASME Section IX. If there is equality of criteria in the welding variables and the DT & RT, just by performing an x-ray as a test, it is valid too.   Regards,   Ramon Briceno Metallurgical Engineer / Oil & Gas Linkedin : www.linkedin.com/in/ ramon-briceño-976265b5 ramon.ibriceno@gmail.com   Sent from Mail for Windows 10   From: 'SENTHILKUMAR SWAMINATHAN' via Materials & Welding Sent: Thursday, July 30, 2020 11:02 PM To: materials-welding@googlegroups.com Subject: Re: [MW:31243] Welder qualified in API1104 Standard with destructive testing re destructive test require for station piping.(sec-ix)   Required DT & RT.  Regards,  S.SENTHILKUMAR  Sent...

Dear expert, Please confirm defect name.. From Herish varude Mob.No.:-7990746918 -- https://materials-welding.blogspot.com/ https://www.linkedin.com/groups/122787 --- You received this message because you are subscribed to the Google Groups "Materials & Welding" group. To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com . To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAGP-YKLm43ZWepPgjmG6fKhH3eKkqGZiJ7dqy-37Hk1Z5kOf_Q%40mail.gmail.com .

As per ASME SEC. 9, a welder can be qualified by volumetric testing method(RT). என்றும் அன்புடன், Thanks & Regards, RAJAVARMAN +971561895584 On Fri, Jul 31, 2020, 5:26 AM HARISH VARUDE < harish.varude02@gmail.com > wrote: Respected all experts, I have one welder who qualified in API standard (for line pipe,gas field)with DT reports but now we want to do his new qualification for station piping as per Section ix Standard,for his qualification destructive test again require or not. Or radiography base we can qualify to him. From Herish varude Mob.No.:-7990746918 -- https://materials-welding.blogspot.com/ https://www.linkedin.com/groups/122787 --- You received this message because you are subscribed to the Google Groups "Materials & Welding" group. To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com . To view this discussion on the web visit https://groups.google.com/d...

Dear sir, P no is same From Herish varude Mob.No.:-7990746918 On Fri, Jul 31, 2020, 8:01 AM José Juan Jiménez Alejandro < jjjimeneza@gmail.com > wrote: You can qualify your welder with guided bend tests or radiography, although there are some P numbers that require only guided bend. Regards!. El jue., 30 jul. 2020 a las 20:26, HARISH VARUDE (< harish.varude02@gmail.com >) escribió: Respected all experts, I have one welder who qualified in API standard (for line pipe,gas field)with DT reports but now we want to do his new qualification for station piping as per Section ix Standard,for his qualification destructive test again require or not. Or radiography base we can qualify to him. From Herish varude Mob.No.:-7990746918 -- https://materials-welding.blogspot.com/ https://www.linkedin.com/groups/122787 --- You received this message because you are subscribed to the Google Groups "Materials & Welding" group. To unsubscribe from this group and st...

Thank you for your e-mail, unfortunately I'm out of office till Monday August 10th . In the meantime I will have minimum access to my e-mail account. When you didn't receive an response before this date I will answer your e-mail on Monday August 10th. Best Regards, Herman Pieper -- https://materials-welding.blogspot.com/ https://www.linkedin.com/groups/122787 --- You received this message because you are subscribed to the Google Groups "Materials & Welding" group. To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com . To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/20200731030255.0A77D841ED7%40hiljo.nl .

Required DT & RT.  Regards,  S.SENTHILKUMAR  Sent from Yahoo Mail on Android On Fri, 31 Jul 2020 at 2:32, HARISH VARUDE <harish.varude02@gmail.com> wrote: Respected all experts, I have one welder who qualified in API standard (for line pipe,gas field)with DT reports but now we want to do his new qualification for station piping as per Section ix Standard,for his qualification destructive test again require or not. Or radiography base we can qualify to him. From Herish varude Mob.No.:-7990746918 -- https://materials-welding.blogspot.com/ https://www.linkedin.com/groups/122787 --- You received this message because you are subscribed to the Google Groups "Materials & Welding" group. To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com . To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAGP-YKLrY6EtcSGS%2Bqi_fBfMDSem...

You can qualify your welder with guided bend tests or radiography, although there are some P numbers that require only guided bend. Regards!. El jue., 30 jul. 2020 a las 20:26, HARISH VARUDE (< harish.varude02@gmail.com >) escribió: Respected all experts, I have one welder who qualified in API standard (for line pipe,gas field)with DT reports but now we want to do his new qualification for station piping as per Section ix Standard,for his qualification destructive test again require or not. Or radiography base we can qualify to him. From Herish varude Mob.No.:-7990746918 -- https://materials-welding.blogspot.com/ https://www.linkedin.com/groups/122787 --- You received this message because you are subscribed to the Google Groups "Materials & Welding" group. To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com . To view this discussion on the web visit https://groups.googl...

Respected all experts, I have one welder who qualified in API standard (for line pipe,gas field)with DT reports but now we want to do his new qualification for station piping as per Section ix Standard,for his qualification destructive test again require or not. Or radiography base we can qualify to him. From Herish varude Mob.No.:-7990746918 -- https://materials-welding.blogspot.com/ https://www.linkedin.com/groups/122787 --- You received this message because you are subscribed to the Google Groups "Materials & Welding" group. To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com . To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAGP-YKLrY6EtcSGS%2Bqi_fBfMDSemr7awiFkDuACDb4EUoCSNfQ%40mail.gmail.com .

See UW-9(d), if you are using ASME Section VIII Div 1 as your construction code On Tue, Jul 21, 2020 at 6:54 AM 'Dinesh' via Materials & Welding < materials-welding@googlegroups.com > wrote: Dear all, Eccentric Reducer ( Fitting to fitting)  fit up, seam matching as below, In this case,what is requirement need to follow and what is exact reason to do 1 inch. flushing on seam . Thanks -- https://materials-welding.blogspot.com/ https://www.linkedin.com/groups/122787 --- You received this message because you are subscribed to the Google Groups "Materials & Welding" group. To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com . To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/baf9d41c-0489-493e-8699-7acebc37e5bdn%40googlegroups.com . -- https://materials-welding.blogspot.com/ https://www.linkedin.com/grou...

Thank you for your e-mail, unfortunately I'm out of office till Monday August 10th . In the meantime I will have minimum access to my e-mail account. When you didn't receive an response before this date I will answer your e-mail on Monday August 10th. Best Regards, Herman Pieper -- https://materials-welding.blogspot.com/ https://www.linkedin.com/groups/122787 --- You received this message because you are subscribed to the Google Groups "Materials & Welding" group. To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com . To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/20200730115019.72500841EBD%40hiljo.nl .

Please discuss with client to get the actual situation approval. என்றும் அன்புடன், Thanks & Regards, RAJAVARMAN +971561895584 On Tue, Jul 21, 2020, 4:54 PM 'Dinesh' via Materials & Welding < materials-welding@googlegroups.com > wrote: Dear all, Eccentric Reducer ( Fitting to fitting)  fit up, seam matching as below, In this case,what is requirement need to follow and what is exact reason to do 1 inch. flushing on seam . Thanks -- https://materials-welding.blogspot.com/ https://www.linkedin.com/groups/122787 --- You received this message because you are subscribed to the Google Groups "Materials & Welding" group. To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com . To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/baf9d41c-0489-493e-8699-7acebc37e5bdn%40googlegroups.com . -- https://materials-weldi...

Hi Chris, You are right. The positions in brazing hase been defined based on flow. Please refer QB-460 (you might have already referred. Thanks, Best Regards, Rajnish Dixit On Monday, 27 July, 2020, 04:40:09 pm GMT+7, chris <chrissabu28@gmail.com> wrote: Hi all; Can i qualify a fillet joint by brazing. I can't find the suitable clause in ASME QB section. Please advise. Regards Chris -- https://materials-welding.blogspot.com/ https://www.linkedin.com/groups/122787 --- You received this message because you are subscribed to the Google Groups "Materials & Welding" group. To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com . To view this discussion on the web visit https://groups.google.com/d/msgid/materials-weldi...

Dear all,  I need clarification of Stainless Steel Tubing tray  earthing required or which standards and codes used. Please clarify . Thanks and regards,  Siva Prasad  -- https://materials-welding.blogspot.com/ https://www.linkedin.com/groups/122787 --- You received this message because you are subscribed to the Google Groups "Materials & Welding" group. To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com . To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CANPWmA2TauDpf%2BZOBcS96AiXH3y9RniHhNYH6sns41Kno8cOiQ%40mail.gmail.com .

Dear Experts, The same things need WPS qualification range codes and standards regards M.LOGANATHAN On Friday, 6 May 2011 01:11:26 UTC+3, Надежда Бомко wrote: Dear experts, Please clarify what requirement for qualification WPS  for fillet weld  Weldolet  PNo 1 Gr.2 to pipe  PNo 1 Gr.1 by ASME section IX. I need defined the range extend for thickness of weldolet.  Thanks & regards . Nadya. -- -- https://materials-welding.blogspot.com/ https://www.linkedin.com/groups/122787 --- You received this message because you are subscribed to the Google Groups "Materials & Welding" group. To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com . To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/c8ea0ce1-7dd8-4a00-a529-f4e77d3d6aaco%40googlegroups.com .

Thanks a lot for your feedback. On Wed, Jul 29, 2020 at 5:31 PM < pgoswami@rogers.com > wrote: Kiran, As I said before, HIC Testing is not MANDATED by ASME Sec-IX or any API, NACE specification . Does the project specification call for HIC testing during PQR qualification stage ?  HIC testing is typically mandated for raw materials , e.g. plates, pipe, line pipes etc. Look at NACE TM-0284 . What's the component pressure vessel or  line pipe? If your organization has done HIC testing  on PQR  coupons , you may use this result as a supplementary information over and above the PQR qualified with PWHT . Combination of PQR is allowed in ASME Sec-IX Hope it clarifies you doubt. Also please scan and share your project requirements ?   Thanks.   P.Goswami.P.Eng, IWE. Independent  & Consulting Welding & Metallurgical Specialist Linkedin: https://www.linkedin.com/in/pradip-goswami-2999855/ Email:pgoswami@rogers.com , pradip.goswami@gmail.com Cell/Whasapp:1-905-9793232   From: ...

Kiran, As I said before, HIC Testing is not MANDATED by ASME Sec-IX or any API, NACE specification . Does the project specification call for HIC testing during PQR qualification stage ?  HIC testing is typically mandated for raw materials , e.g. plates, pipe, line pipes etc. Look at NACE TM-0284 . What's the component pressure vessel or  line pipe? If your organization has done HIC testing  on PQR  coupons , you may use this result as a supplementary information over and above the PQR qualified with PWHT . Combination of PQR is allowed in ASME Sec-IX Hope it clarifies you doubt. Also please scan and share your project requirements ?   Thanks.   P.Goswami.P.Eng, IWE. Independent  & Consulting Welding & Metallurgical Specialist Linkedin: https://www.linkedin.com/in/pradip-goswami-2999855/ Email:pgoswami@rogers.com,pradip.goswami@gmail.com Cell/Whasapp:1-905-9793232   From: materials-welding@googlegroups.com <materials-welding@googlegroups.com> On Behalf ...

Hi KK, Your procedure is qualified as per ASME section IX, qualification procedure part is completed. This is an additional project requirement, it has nothing to do with procedure qualification so you can make a coupon and test for HIC as per project specification as per NACE TM-0284 like corrosion tests or any test other than required as per ASME Section IX. On Tue, Jul 28, 2020 at 11:02 AM K K < karan.hbl@gmail.com > wrote: Hi, Yes, Piping requirements. SA 516 gr 60/70. and according to ASME Sec.IX and ASME B31.3. The main PQR is qualified with PWHT, but not HIC tested. And I have additional PQR with HIC tested, but not qualified with PWHT, and no other lab test reports like a mechanical test, bend test, and hardness test report, shall I combined this PQR to my WPS. Please looking you feedback. Thanks  Kiran On Tuesday, July 28, 2020 at 10:12:01 AM UTC+5:30, Sudhakar Kuppuswamy wrote: Hi, Please specify the material grade and the design code.  As you have mentioned Line class,...

Dear Sir, Thanks for your response. Sorry I am not able to understand your answer. You mean that PQR can be separately included, there will be no issues right.  I will explain to you in detail. I have one WPS and with two PQR's. one PQR with PWHT and second PQR we prepared an additional test coupon for the HIC test only. And HIC  PQR has tested accordingly NACE MR 103 , API(RP-582), and NACE TM -0284, but in PQR we have not conducted mechanical, PWHT, and other tests. If we have two PQR , so according to ASME Sec.IX we have to combine both PQR in WPS, with all essential variables.   Please give me your response immediately, because my document is under hold. Thanks  Kiran On Wed, Jul 29, 2020 at 9:20 AM < pgoswami@rogers.com > wrote: Hello KK, HIC testing usually does not apply or  procedure qualification according to Sec-IX or even  as per oil and gas industry standards, say NACE MR 103 , API(RP-582). Common industry document for HIC testing is NACE TM -0284, which calls ...