[MW:26008] Effect of Zinc or Mangnese Phosphating on Welding(GMAW)

Is there any negative impact over welding if the Phosphating(Zinc or Mangnese) were not done properly?

Base material is EN-45A(Tempered having 38 HRC)

Consumable- ER-70S-6

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/167f96fd-a718-49b9-b22f-85b640bb1e2e%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.