Pradip Goswami, P.Eng,IWE
Independent Welding & Metallurgical Engineering Specialist.
Saudi Aramco Approved-Designated Project Welding Representative (DPWR).
Ontario,Canada.
ca.linkedin.com/pub/pradip-goswami/5/985/299
H-905-9631505
C-905-9793232
From: materials-welding@googlegroups.com [mailto:materials-welding@googlegroups.com] On Behalf Of Karthikeyan Muthuvel
Sent: Monday, December 26, 2016 7:02 AM
To: materials-welding@googlegroups.com
Subject: [MW:25843] Welder performance for Temper Bead Welding
Dear Experts,
Could you please clarify the mentioned subject, is it necessary to qualify the welders to perform the Temper Bead weld. If yes, what is the procedure/method for qualifying the welders.
Thank you,
Karthikeyan M
QA/QC Team
Al-Muzain, Saudiarabia.
--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAL7K%3D_%2BqTaAvJofJjv7KraxBMufM0ZmpsLPTpQ2%2BRSqKrzkrtw%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.
No comments:
Post a Comment