Wednesday, May 30, 2012

[MW:14406] Code & Standard for Tubing

Dear Expert,

 

In my project, we have some tubing line ( ½” SS316L and Duplex) need to weld with reducer same material, we have WPS for both of material. The problem is the RT report show internal concavity but we do not have accept criteria for those weld joints as per drawing, Spec..etc..

 

Kindly please advise which code & standard are using for the tubing. ( tubing fix on the hydraulic control panel )

 

 

Regards,

 

Thuan

By -

No comments:

Post a Comment

Subscribe to: Post Comments (Atom)

[MW:35668] Selection of Filler/Electrode.

Dear Gentlemen, Kindly advise me as we have tube to tubesheet joint. Tube moc is incoloy 800 And tubesheet moc is F53 SDSS (Super duplex sta...

  • Materails FAQs
    Q: What are equivalents for standard Q 235 B (and Q 235 A) for U-channels? ...
  • RE: [MW:5585] Buttering of weld joints
    Definition of buttering from ASME Section IX, QW/QB-492 Definitions:   Buttering:  the addition of material, by welding, on one or bot...
  • WELD AND WELDING SYMBOLS
    Section I. PRINT READING 3-1. GENERAL a. Drawings . Drawing or sketching is a universal language used to convey all necessary information to...