Re: [MW:11599] PRODUCTION WELDING WITH 2 WPS TO COVER THICKNESS RANGE AS PER BSEN

Hi, As per EN you cannot combine the WPS Thanks & Regards, (Karthik) Karthikeyan.S QA/QC Manager Getabec Energy Co.,Ltd. 379,Moo6,Soi8,Nikhomphatana, Rayong-21180, Thailand. Phone: 0066 38 897035-8 (Off) Fax: 0066 38 897034 Hand Phone: 0066 892512282 --- On Wed, 7/6/11, manoj john <manojacgnr@gmail.com> wrote: From: manoj john <manojacgnr@gmail.com> Subject: [MW:11597] PRODUCTION WELDING WITH 2 WPS TO COVER THICKNESS RANGE AS PER BSEN To: materials-welding@googlegroups.com Date: Wednesday, July 6, 2011, 1:02 AM  Dear All members,   I have 2 qualified procedures in SMAW process as per BSEN one procedure qulify a range of thickness 24mm maximum with single bevel and another procedure qualified a range of 25mm to 100 mm with double bevel.   My doubt is whether i can weld 50 mm thk plate with single bevel using with these 2 WPS.    Thank you, With best Reagards.   Manoj -- To post to this group, send email to materials-welding@googlegroups.com To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com For more options, visit this group's bolg at http://materials-welding.blogspot.com/ The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.