Thursday, September 8, 2016

Re: [MW:25352] LTCS PQR

Dear Mr. Mushtaq Ahmad,
Please clear following points.
1) Qualification Code.
2) Thickness range (Min. Max.)
Client requirements (Saudi Aramco etc) 

Regards,

Muhammad Babur Khan Lashari
Sr. QA/QC Inspector

(CSWIP 3.1 / CWI II From PWI) 

 Khaled Juffli Industial Company

Mob: + 966 56 2179280 / 58 2774568

PAK : + 92 334 6186285

Skype: babur.lashari

E-Mail: babur.khan@kjgroup.com


On Thu, Sep 8, 2016 at 8:21 AM, Mustaq Ahmad <mustaqnk@gmail.com> wrote:
Dear Experts 

I am new for this job please help me 

for PQR of LTCS

1) required thickness min is 6.35mm &  dia is 12 inch

2) design press = 20kg/cm2
    design temp  = -45.6/37.8 degreee celcius
     op press      = 20 max
     op temp       = -40 degree celcius

3)  material is pipe - A 333 GR 6(P1 &G1) and flange - A350 GR LF2 RF

4) service is LPG plant- Relief and blow down

now please suggest me 
 a) what is is the size of the test coupon can be selected(dia with schd) where can i find the exact length of weld required to carry out mechanical testing for this PQR?
 b) is it possible to carry out the PQR for pipe to flange joint 
 c) what consumable can be selected for this if GTAW & SMAW ?
 

Regards
AHMAD

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/1dff4f26-85ba-4a9d-a731-d037ac27bea3%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAN53wK21jKPmqk0%3Dk%2BmviRogDBvZ67%2B7tF91KUfjuE-UBZr18Q%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.

No comments:

[MW:34919] Welder qualification certificate

Dear All     anyone can share a format for welder certificate and card format        Thanks & Best Regards Saleem manhappulath Mob:+9665...