Re: [MW:11709] P1+P4 Fiiler

If you want to avoid any PWHT then use Inconel filler wire or electrode otherwise E7018 or ER 70 S2 is suitable and acceptable .
 
Regards,
Francis
----- Original Message -----
From: Mumtaz Ali Khan
To: materials-welding@googlegroups.com
Sent: Tue, 12 Jul 2011 11:51:08 +0530 (IST)
Subject: Re: [MW:11694] P1+P4 Fiiler

ER80S-B2 Is best

On Mon, Jul 11, 2011 at 12:33 PM, Naresh Kumar <snareshkumar30@yahoo.com> wrote:

Dear friends,

I have a doubt about SA106 B+SA335 P11 disimilar welding;Which electrode is best?? whether ER70S2 OR ER80S-B2;

Regards,

S.Naresh

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com

For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

--

To post to this group, send email to materials-welding@googlegroups.com

To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com

For more options, visit this group's bolg at http://materials-welding.blogspot.com/

The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.