Pl qualify the combination in line with Drawing .
On Sat, 21 Jun 2025 at 12:10 PM, nagendran natarajan <nagend3484@gmail.com> wrote:
Dear all ,I have a situation to Qualify single Bevel CJP - API 5L X 65 pipe with Plate API 2W Gr.50 PL1 , using structural Welding code AWS D 1.1.The Problem is API 5L X 65 is unlisted in AWS D 1.1 and API 2W is listed in Group 3.AWS D1.1 says , PQR using any unlisted materials shall qualify for that particular combination only.which means i have to go for pipe and plate combination for PQR. Curious to know whther anyone have done PQR for this situation?, If so pls throw some light..--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/materials-welding/3bd3cf09-a8d0-4d38-92f3-7d678aedd3adn%40googlegroups.com.
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/materials-welding/CADder3PvicaODAmyvA3%2BfkBFveV%2BsuWAE%2BWR6b0QQH2nNhiVZw%40mail.gmail.com.
No comments:
Post a Comment