Saturday, June 21, 2025

Re: [MW:35671] Clarification on Pressure Drop During Hydro test Due to Temperature Variation

Pressure Directly proportional to Temperature when Volume is constant 

THANKS & BEST REGARDS,
KG.PANDITHAN, BE, IWE,  CSWIP 3.1,
ISO 9712 Level 2 in VT,
ASNT-Level II in PT,MT,RT & UT,
LA ISO 9001-2015, ISO 3834, EN 15085, 
International Welding Engineer. 
CONSULTANT-WELDING & QUALITY
Mobile no: +919940739349

On Sat, 7 Jun 2025, 10:36 Vinoth Kanna, <gvinoth43@gmail.com> wrote:

Dear Experts,

During a hydrostatic test, we observed a gradual pressure drop of approximately 0.7 bar in a 2-inch pipe with a length of 31 meters. The test pressure was 12.5 bar. This issue has occurred in multiple tests.

We request your explanation regarding the relationship between pressure and temperature, and how temperature variations can affect hydrotest results.Also, we seek clarification on the acceptable pressure drop limits considering potential temperature changes during the test.

Thank you for your support.


Regards,

Vinoth G





--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/materials-welding/CA%2BoUWiqgcyN5j-c5rGmAXsqBeg%3DC7k%3DGbqo_sZw03rTY4MYjTQ%40mail.gmail.com.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/materials-welding/CAJzm4ePMtrxH_PiGeCJzPMJoEOhQ4w%3D2hW3dQiA%3D1HFJMq_evQ%40mail.gmail.com.

No comments:

Re: [MW:35686] HDPE WPS

Refer ASME SEC IX  There is separate chapter for Plastic welding . Based on that you have to prepare  Sent from my iPhone On 21 Jun 2025, at...