Friday, June 6, 2025

Re: [MW:35640] IP Joint

Greetings,

I think 'IP' joint means 'incomplete penetration'(partial penetration) joint.




On Mon, May 26, 2025, 7:30 AM 'Eugene Matsko' via Materials & Welding <materials-welding@googlegroups.com> wrote:
In essence, an IP pipe joint is any connection made between pipes that are sized using the IPS or NPS standards, regardless of the specific connection method.

Sent from my iPhone

On May 24, 2025, at 9:48 PM, Saurabh Jain <ensaurabh@gmail.com> wrote:


Hello experts,

I would like to know what is IP joints in piping(31.3)? 

Regards
Saurabh

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/materials-welding/CADr-LL_mAcbc5GDt1TSd_Oip4ns3sqL_mS_AOtP4PyW7a9V9OQ%40mail.gmail.com.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/materials-welding/7BC10B8B-F349-4C33-B40E-20F56C6FB24A%40yahoo.com.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/materials-welding/CACoqHbO4S8M1DgQCKJAatH4y40G4HY03Ryiwvr6BGxwEBKi8_Q%40mail.gmail.com.

No comments:

Re: [MW:35737] Bend Test and Tensile Test failed for ET45 Micro Welded Coupon

Hi As its %elongation is very low  Better try buttering on jt surrace with ductile consumable like pure Ni i. E Ni1 And later weld jt with c...