Thursday, February 13, 2025

Re: [MW:35388] Acceptance criteria for wrinkles

Pls see PFI ES 24

On Thu, 16 Jan 2025 at 11:02, Kannayeram Gnanapandithan <kgpandithan@gmail.com> wrote:
pl ref BS EN 12952-5

THANKS & BEST REGARDS,
KG.PANDITHAN, BE, IWE,  CSWIP 3.1,
ISO 9712 Level 2 in VT,
ASNT-Level II in PT,MT,RT & UT,
LA ISO 9001-2015, ISO 3834, EN 15085, 
International Welding Engineer. 
CONSULTANT-WELDING & QUALITY
Mobile no: +919940739349


On Thu, Jan 16, 2025 at 10:29 AM raj kumar <srajmechanic@gmail.com> wrote:
Pls suggest what is acceptance criteria for wrinkles on Stainless steel elbow.


--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/materials-welding/CABHGzEUoZU9Gk%3DQmNv3Tcm2VW3znE-X%2B%3DLUjbPaz%3D4irh9t8tg%40mail.gmail.com.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/materials-welding/CAJzm4eN6nue0T-CCXmkXMR5TJ9kwi1QO2xAs08ikL9ODjLojCA%40mail.gmail.com.


--
Shri Krishna Tripathi
IGCAR,
Department of Atomic Energy

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/materials-welding/CAE5Fvtf69nokfLsXsMJgwec4boyJt0WimotyTwf5xFN1n6kTkw%40mail.gmail.com.

No comments:

Re: [MW:35477] WPS for Furnace PWHT

The spools have 1" to 36" Piping joints. The WPS with PWHT is available only for large diameter / high thickness. can we do PWHT i...