Tuesday, February 18, 2025

Re: [MW:35443] Digest for materials-welding@googlegroups.com - 2 updates in 1 topic

ASME Section IX and ISO 15614-1 have overlapping but not identical requirements. You must verify that the ISO 15614-1 qualification meets ASME IX requirements.

BR
Deerendra

On Sat, 15 Feb, 2025, 11:06 israr ahmed, <ahmedisrar.nm@gmail.com> wrote:
Can anybody suggest if we can prepare a asme ix wps based on the test carried out as per iso 15614-1? 

On Fri, 14 Feb, 2025, 6:06 pm , <materials-welding@googlegroups.com> wrote:
sujit kumar <sujitkumar19942@gmail.com>: Feb 13 08:33AM +0300

Hello experts
 
Greetings for the day.
 
 
Kindly please tell me what will be the filler wire for welding of
SA182F11 to SSA268 TP446
 
 
 
 
Best regards
Sujit kumar
sridhar cn <sridharcn305@gmail.com>: Feb 13 11:00PM +0530

ERNiCr-3 (Inconel 82) for corrosion resistance or ERNiCrMo-3 (Inconel
625) for corrosion resistance
and extreme environments, or ER309L for general purpose could be used.
Preheating & interpass temp. control will help to minimize the risk of
cracking. PWHT might be necessary
to relieve stresses and improve the weld properties.
Sridhar.
-------------------------------------------------------------------------------------------------------------------------------------
 
 
You received this digest because you're subscribed to updates for this group. You can change your settings on the group membership page.
To unsubscribe from this group and stop receiving emails from it send an email to materials-welding+unsubscribe@googlegroups.com.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/materials-welding/CAEJozaJHmQHhU37qEZz-L2FrKMP1JtzMw%3DJbjYTU%2BjtGZ5SCYA%40mail.gmail.com.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/materials-welding/CAG0nF9EBkX-A066nwzwsBMqR5Q3MHiKXgvqpmT9zgH12yh1TfQ%40mail.gmail.com.

No comments:

Re: [MW:35477] WPS for Furnace PWHT

The spools have 1" to 36" Piping joints. The WPS with PWHT is available only for large diameter / high thickness. can we do PWHT i...