Re: [MW:35357] Application of Non PWHT WPS to PWHT vessel

new pqr  to be made with vessels simulation temp, hope so

THANKS & BEST REGARDS,

KG.PANDITHAN, BE, IWE,  CSWIP 3.1,

ISO 9712 Level 2 in VT,

ASNT-Level II in PT,MT,RT & UT,

LA ISO 9001-2015, ISO 3834, EN 15085, 

International Welding Engineer. 

CONSULTANT-WELDING & QUALITY

Mobile no: +919940739349

On Thu, Dec 19, 2024 at 3:24 PM Vishwas Keskar <vvkeskar123@gmail.com> wrote:

When all other essential variables are same , except PWHT , you have to revise WPS  with PWHT and do further needful in consultation with AI 

Thanks

Vishwas 

IWE

Sent from my iPhone

On 19 Dec 2024, at 10:52 AM, Vasagan Balaji <7vasagan@gmail.com> wrote:

Hello all,

I have a case for a U stamp vessel , Vessel designed initially with  no PWHT,  hence non PWHT wps applied throughout the production phase,  later the manufacturer converted vessel requirement to PWHT ! Manufacturer justifies since all other patemerts met the requirement othethan  PWHT , they intent to proceed for PWHT ! What's ASME position shall be here ?

Regards 

Vasagan 

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/materials-welding/CAKV0Q%2Bj0HY_TWzxxXbAnt%2Bm-QXHXVE5xgGfBAgKc4QSQDtq5tg%40mail.gmail.com.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/materials-welding/6F63C283-5709-4107-907A-DA0EDA402D36%40gmail.com.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/materials-welding/CAJzm4eOyaYkYq6QorDUQy7QkQpd6fyMVdYimRanKaYHX__sJKA%40mail.gmail.com.