Hope the snap shor helps to understand the requirement
Thanks & Regards
J.Gerald Jayakumar
0091-8838619635
On Sunday 15 December, 2024 at 01:19:07 pm IST, 'james gerald' via Materials & Welding <materials-welding@googlegroups.com> wrote:
Provided welding consumable guaranteed impact tested as per ASME SecIIC
--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/materials-welding/1855906062.1311416.1734248814585%40mail.yahoo.com.
On Sun, 15 Dec 2024 at 13:13, 'james gerald' via Materials & Welding<materials-welding@googlegroups.com> wrote:No impact test required--
On Fri, 13 Dec 2024 at 20:11, Chirag Patel<chiragp1985@gmail.com> wrote:Dear All,
Design code – ASME B31.3, Welding Code- ASME BPVC SEC IX
Material to be used used during Fabrication - SA 516 Gr 70
Production Thickness range-8 mm(Minimum)- 20mm(Maximum)PWHT – NilMDMT-= -29 Deg Cel.Kindly give your valuable suggestions for applicability of PQR impact requirement for above details.Pl.reply with code clause.--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/materials-welding/73179f68-79bc-4185-9aa5-f696add58852n%40googlegroups.com.
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/materials-welding/211530362.847681.1734248493634%40mail.yahoo.com.
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/materials-welding/1855906062.1311416.1734248814585%40mail.yahoo.com.
Comments