Re: [MW:35342] Applicability of Impact requirement

No impact test required

Yahoo Mail: Search, organise, conquer

On Fri, 13 Dec 2024 at 20:11, Chirag Patel

<chiragp1985@gmail.com> wrote:

Dear All,

Design code – ASME B31.3, Welding Code- ASME BPVC SEC IX

Material  to be used used during Fabrication - SA 516 Gr 70

Production Thickness range-8 mm(Minimum)- 20mm(Maximum)

PWHT – Nil

MDMT-= -29 Deg Cel.

Kindly give your valuable suggestions for applicability of PQR impact requirement for above details.

Pl.reply with code clause.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/materials-welding/73179f68-79bc-4185-9aa5-f696add58852n%40googlegroups.com.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/materials-welding/211530362.847681.1734248493634%40mail.yahoo.com.