Re: [MW:35356] Application of Non PWHT WPS to PWHT vessel

When all other essential variables are same , except PWHT , you have to revise WPS  with PWHT and do further needful in consultation with AI 

Thanks

Vishwas 

IWE

Sent from my iPhone

On 19 Dec 2024, at 10:52 AM, Vasagan Balaji <7vasagan@gmail.com> wrote:

Hello all,

I have a case for a U stamp vessel , Vessel designed initially with  no PWHT,  hence non PWHT wps applied throughout the production phase,  later the manufacturer converted vessel requirement to PWHT ! Manufacturer justifies since all other patemerts met the requirement othethan  PWHT , they intent to proceed for PWHT ! What's ASME position shall be here ?

Regards 

Vasagan 

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/materials-welding/CAKV0Q%2Bj0HY_TWzxxXbAnt%2Bm-QXHXVE5xgGfBAgKc4QSQDtq5tg%40mail.gmail.com.