Use 316Ti, for 6CrNiMoTi 17122. and for 13CrMo 4-5 either NiCr3 or 309 ( based on service Temp)
THANKS & BEST REGARDS,
KG.PANDITHAN, BE, IWE, CSWIP 3.1,
ISO 9712 Level 2 in VT,
ASNT-Level II in PT,MT,RT & UT,
LA ISO 9001-2015,
International Welding Engineer.
CONSULTANT-WELDING & QUALITY
Mobile no: +919940739349
On Wed, Feb 22, 2023 at 9:12 AM Anand Elankumaran <email2uranand@gmail.com> wrote:
Dear Experts,--Could you Please advise if the below consumable selection is correct or not.
WPS Requirements as per BS EN 15609 & 15614
Material
Size
Process(Est. Weld thk)
Material Grouping as per PD CR ISO 15608
Suitable Consumable
Remarks
GTAW
SMAW
1.4571EN X 6 CrNiMoTi 17 122 to
1.4571EN X 6 CrNiMoTi 17 12222.3 X 2.77
GTAW (2.77)
8.1
ER 316L-17
--
(Exaton 316/316L-17)
1.4571EN X 6 CrNiMoTi 17 122 to
1.4571EN X 6 CrNiMoTi 17 122168.3 X 10.97
GTAW + SMAW (4 + 6.97)
8.1
ER 316L-17
E 316L-17
(Exaton 316/316L-17)
1.7335EN, 13CrMo4-5 to
1.4571EN X 6 CrNiMoTi 17 12233.4 X 3.38
GTAW (3.38)
8.1 - 5.1
ER NiCrMo-3
--
--Thanks and Regards,E. Anand,Lead QA-QC,Sohar,Oman.
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CANOYChwvFgCTrAHGN4Jp62zbaUGPfo%3D2YjVi7Vn8y44q9eufcQ%40mail.gmail.com.
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAJzm4eNFMDnEksFYoUNmh%2BM%2Ba4LkFJpkWjhxWELKMX3WZ5%2B0WQ%40mail.gmail.com.
No comments:
Post a Comment